Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

CONSOLIDATED BEARING 11205 Self Aligning Ball Bearings

9.2 Inch | 234Millim 0013992048417
N/A Triple Lip Labyrinth

CONSOLIDATED BEARING 10409 C/3 Self Aligning Ball Bearings

53 13800
nn3010m2kc1nap5-nach 0.45 KGS

CONSOLIDATED BEARING 10409 Self Aligning Ball Bearings

SCHAEFFLER GROUP Bearings
B04120 N/A

CONSOLIDATED BEARING 10408 Self Aligning Ball Bearings

Plain Bearings BOSTON GEAR
0781711334225 44.038

CONSOLIDATED BEARING 10405 M Self Aligning Ball Bearings

4547359282962 N/A
NTN 0.0

CONSOLIDATED BEARING 2322-KM C/3 Self Aligning Ball Bearings

Flanged 1.1
0 Inch | 0 Millimete Thermoplastic

CONSOLIDATED BEARING 2322-KM Self Aligning Ball Bearings

PT INTERNATIONAL PT INTERNATIONAL
M06110 0.0

CONSOLIDATED BEARING 2322-K C/3 Self Aligning Ball Bearings

4.938 Inch | 125.425 31171511
56.296 Pillow Block

CONSOLIDATED BEARING 11508 Self Aligning Ball Bearings

1.26 Inch | 32 Milli 32 mm
SKF -

CONSOLIDATED BEARING 11506 Self Aligning Ball Bearings

Ball B00308
Open 208

CONSOLIDATED BEARING 11504 Self Aligning Ball Bearings

Steel CONSOLIDATED BEARING
N/A 0.0
1/30