Take Up Unit Bearings

Contact Now

Take-up bearings are mounted bearings consisting of a guide frame, positioning screw, and mounting hardware and are typically used to align conveyor tracks and maintain conveyor belt tension.  We offers a wide range of take-up bearings units both in inch and metric dimensions.  Each are available with or without an eccentric locking collar. Medium Duty, Heavy Duty and other types are available along with various seal options and plated housing options.  AST's takeup units housings are constructed out of cast iron and have a chrome steel bearing as standard.

Take-up bearings and frames align conveyor tracks and adjust and maintain tension on conveyor belts. These assemblies contain a bearing, housing, guiding frame, and positioning screw. The positioning screw adjusts the bearing and housing's location along the frame. This frame must be long enough to achieve proper tension in the belt. Take-up frames can be center-pull, top-pull, or bottom-pull depending on the positioning screw's location in the assembly. Frames guide the take-up bearing while the bearing reduces friction.

QM INDUSTRIES QMTU10J200SN Take Up Unit Bearings

2 mm 42 mm
45 2,700 rpm

QM INDUSTRIES QMTU10J115SET Take Up Unit Bearings

1 mm 9,6 mm
90x140x24 1,5 mm

QM INDUSTRIES QMTU10J050SEC Take Up Unit Bearings

30 mm 81 mm
K75x81x30 30

QM INDUSTRIES QMTU10J050SC Take Up Unit Bearings

82.169 mm 42.85 mm
100 N/mm² 280 kN

QM INDUSTRIES QVVTU22V100SO Take Up Unit Bearings

2,3 Kg 50,8 mm
86 mm 51,6 mm

QM INDUSTRIES QVVTU22V100SEO Take Up Unit Bearings

5300 r/min 45 mm

QM INDUSTRIES QVVTU22V100SEC Take Up Unit Bearings

0,0132 Kg 12 mm
8,74 kN 26

QM INDUSTRIES QVVTU19V308SM Take Up Unit Bearings

62.0 62 kN
3 mm UCC310

QM INDUSTRIES QVVTU22V311SEM Take Up Unit Bearings

110 mm 110
54 mm 110x150x54

QM INDUSTRIES QVVTU22V311SEN Take Up Unit Bearings

85.8 mm 31 kN
57 mm 0.095

QM INDUSTRIES QAATU18A304SEN Take Up Unit Bearings

0 Inch | 0 Millimete 38,8 mm
3.9 Inch | 99 Millim 14 kN

QM INDUSTRIES QAATU18A304SO Take Up Unit Bearings

NACHI 22.225 mm
17.463 mm 1.6 mm