Home>Products>Take Up Unit Bearings>REXNORD MT95215 Take Up Unit Bearings
REXNORD MT95215 MODELS
Need a CAD or 3D Model?
REXNORD MT95215 Take Up Unit Bearings
category
Take Up Unit Bearings
REXNORD MT95215 Bearing SPECIFICATIONS
The online NACHI BEARINGS LTD REXNORD MT95215 Take Up Unit Bearings 1600 r/min (Grease) Lubrication Speed parts store gives you immediate access to a selection of more than 1.4 million new, 25 Width (mm) used, remanufactured.
- REXNORD
MT95215
- 73.025 mm
- 150 mm
- 45.796 mm
- 88.9 mm
- 195.275 mm
- 4.763 mm
- 35.719 mm
- 187.325 mm
- NACHI BEARINGS LTD2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Products and services REXNORD MT95215 Take Up Unit Bearings
- 73.025 mm
- 150 mm
- 45.796 mm
- 88.9 mm
- 195.275 mm
- 4.763 mm
- 35.719 mm
- 187.325 mm
- 95.25 mm
- 38.1 mm
- 330.2 mm
- 53.975 mm
- 22.225 mm
- 3/8 NPT
- 1/8 NPT
- 34.925 mm
- SSAFS 517
- SR-17-14
- TER 52
- EPR 9
- 1050 r/min
- 78.7 kN
- 47.2 kN
- 28.9 kN
- 26.7 kN
- 32 kN
- 9.25 kN
- 24.9 kg
- 2 x 5/8-11 UNC
- 298.3 N·m
- 8
- 110.56 g
REXNORD MT95215 Technical information REXNORD MT95215 Take Up Unit Bearings
Together REXNORD MT95215 Take Up Unit Bearings Application | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | Noun | UNSPSC | Weight | Inventory | Slot Width | Weight / LBS | Housing Style |
MGT952157 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 45.4 | 0.0 | 0 Inch | 0 Millimeter | 100 | Center Pull Vertical Elevator Head End |
MHT9521512 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 58.112 | 0.0 | 0 Inch | 0 Millimeter | 128 | Center Pull Vertical |
MHT9521524 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 72.186 | 0.0 | 0 Inch | 0 Millimeter | 159 | Center Pull Vertical |
MHT9521536 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 86.71 | 0.0 | 0 Inch | 0 Millimeter | 191 | Center Pull Vertical |
MHT9521518 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 64.468 | 0.0 | 0 Inch | 0 Millimeter | 142 | Center Pull Vertical |
MHT9521530 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 79 | 0.0 | 0 Inch | 0 Millimeter | 174 | Center Pull Vertical |
ZST9521518 | REXNORD | - | - | - | 81.72 | 0.0 | - | - | - |
ZNT9521524 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 52.21 | 0.0 | 0 Inch | 0 Millimeter | 115 | Top Angle |
ZNT9521518 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 55.388 | 0.0 | 0 Inch | 0 Millimeter | 95 | Top Angle |
ZFT9521512 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 51.756 | 0.0 | 0 Inch | 0 Millimeter | 114 | Center Pull Horizontal Elevator Boot End |
ZGT952157 | REXNORD | 2.938 Inch | 74.625 Millimeter | Bearing | 31171533 | 45.4 | 0.0 | 0 Inch | 0 Millimeter | 100 | Center Pull Vertical Elevator Head End |
QM INDUSTRIES QAATU18A304SEN Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
QM INDUSTRIES QAATU18A304SO Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J050SC Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V311SEN Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J200SN Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V311SEM Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V100SEO Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU19V308SM Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V100SEC Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V100SO Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J050SEC Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J115SET Take Up Unit Bearings | da:73.025 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:195.275 mm; S:4.763 mm; ba:35.719 mm; H:187.325 mm; H1:95.25 mm; H2:38.1 mm; L:330.2 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:SSAFS 517; Stabilizing ring:SR-17-14; Taconite seal:TER 52; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:78.7 kN; P90°:47.2 kN; P120°:28.9 kN; P150°:26.7 kN; P180°:32 kN; Pa:9.25 kN; Mass pillow block:24.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Initial grease fill:110.56 g; |
REXNORD MT95215 Take Up Unit Bearings Video
REXNORD MT95215 INTERCHANGE
Take Up Unit Bearings Part series MT95215 is a potential replacement for these common bearing part numbers:
MT95215
MT95215
MT95215
MT95215
MT95215
MT95215
MT95215
MT95215
Contact Us
- NACHI BEARINGS LTD
- Address7123 Kimberly Drive, Carol Stream, Illinois U.S.A.
- Phone(Working Time)+1-630-612-6376
- Fax
REXNORD MT95215 Technical Articles
Can I just replace rod bearings? |
Do both wheel bearings need replaced at the same time? |
How are steel ball bearings made? |
Take Up Unit Bearings CATEGORIES
- Angular Contact Ball Bearings
- Cam Follower and Track Roller - Stud Type
- Cartridge Unit Bearings
- Cylindrical Roller Bearings
- Flange Block Bearings
- Mounted Units & Inserts
- Needle Non Thrust Roller Bearings
- Pillow Block Bearings
- Precision Ball Bearings
- Self Aligning Ball Bearings
- Single Row Ball Bearings
- Sleeve Bearings
- Spherical Plain Bearings - Radial
- Spherical Plain Bearings - Rod Ends
- Spherical Roller Bearings
- Take Up Unit Bearings
- Tapered Roller Bearing Assemblies
- Insert Bearings Spherical OD
- Timken Hh221410 Bearing
- Timken 212049 Bearing
- Timken L68110 Bearing
- Timken L44649 Bearing
- THK Bearing
- SKF Bearing
- Thin Section Bearing
- Wheel Hub Bearing
- Excavator Bearing
- NOK SEAL
- SKF OIL SEAL
- TIMKEN NATIONAL SEALS