Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

Bearing Number	Bore Dia	Outer DIa	Width	Size
CONSOLIDATED BEARING 11205 Self Aligning Ball Bearings	Intermediate Duty	Setscrew Ball Bearing	203 Series	Cast Iron
CONSOLIDATED BEARING 10409 C/3 Self Aligning Ball Bearings	Normal Duty	Setscrew Ball Bearing	205 Series	Cast Iron
CONSOLIDATED BEARING 10409 Self Aligning Ball Bearings	Intermediate Duty	Eccentric Collar Ball Bearing	207 Series	Zinc
CONSOLIDATED BEARING 10408 Self Aligning Ball Bearings	Medium Duty	Setscrew Ball Bearing	216 Series	Cast Iron
CONSOLIDATED BEARING 10405 M Self Aligning Ball Bearings	Medium Duty	Setscrew Ball Bearing	216 Series	Cast Iron
CONSOLIDATED BEARING 2322-KM C/3 Self Aligning Ball Bearings	Normal Duty	Setscrew Ball Bearing	207 Series	Cast Iron
CONSOLIDATED BEARING 2322-KM Self Aligning Ball Bearings	Normal Duty	Eccentric Collar Ball Bearing	204 Series	Zinc
CONSOLIDATED BEARING 2322-K C/3 Self Aligning Ball Bearings	TOP ANGLE	12.0000 in	2-1/2 X 2-1/2 X 5/16	10
CONSOLIDATED BEARING 11510 Self Aligning Ball Bearings	115 Series	Non-Expansion	2 Bolt Pillow Block	Triple Lip
CONSOLIDATED BEARING 11508 Self Aligning Ball Bearings	90 mm	210 mm	25 mm	1.5 mm
CONSOLIDATED BEARING 11506 Self Aligning Ball Bearings	Normal Duty	Grip Tight Ball Bearing	210 Series	Cast Iron
CONSOLIDATED BEARING 11504 Self Aligning Ball Bearings	Normal Duty	Setscrew Ball Bearing	204 Series	Cast Iron