Home>Products>Take Up Unit Bearings>REXNORD MHT8520724 Take Up Unit Bearings
REXNORD MHT8520724 MODELS
Need a CAD or 3D Model?
REXNORD MHT8520724 Take Up Unit Bearings
Take Up Unit Bearings
REXNORD MHT8520724 Bearing SPECIFICATIONS
With over 10170 full-service stores, our REXNORD MHT8520724 Take Up Unit Bearings inventory is NACHI BEARINGS LTD extensive and KOYO Brand our parts are priced right. within 24 hours. This 55 Bore Diameter (mm) helps you maximize your productivity by saving time and your hard-earned dollars.
- REXNORD
MHT8520724
- 71.438 mm
- 150 mm
- 45.796 mm
- 88.9 mm
- 198.438 mm
- 4.763 mm
- 35.719 mm
- 182.166 mm
- NACHI BEARINGS LTD2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Products and services REXNORD MHT8520724 Take Up Unit Bearings
- 71.438 mm
- 150 mm
- 45.796 mm
- 88.9 mm
- 198.438 mm
- 4.763 mm
- 35.719 mm
- 182.166 mm
- 95.25 mm
- 31.75 mm
- 250.825 mm
- 279.4 mm
- 53.975 mm
- 330.2 mm
- 19.05 mm
- 53.975 mm
- 22.225 mm
- 3/8 NPT
- 1/8 NPT
- 34.925 mm
- FSAF 517
- SR-17-14
- TER 53
- EPR 9
- 1050 r/min
- 61.4 kN
- 36.9 kN
- 23.1 kN
- 20.9 kN
- 25.4 kN
- 9.25 kN
- 17.9 kg
- 2 x 5/8-11 UNC
- 149.1 N·m
- 5
- 0.625 in
- 110.56 g
REXNORD MHT8520724 Technical information REXNORD MHT8520724 Take Up Unit Bearings
Together REXNORD MHT8520724 Take Up Unit Bearings Application | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | d | Noun | Weight | UNSPSC | Inventory | Slot Width | Weight / LBS | Inch - Metric |
ZHT8520724 | REXNORD | 2.438 Inch | 61.925 Millimeter | Bearing | 43.584 | 31171533 | 0.0 | 0 Inch | 0 Millimeter | 96 | Inch |
ZNT8520724 | REXNORD | 2.438 Inch | 61.925 Millimeter | Bearing | 34.5 | 31171533 | 0.0 | 0 Inch | 0 Millimeter | 76 | Inch |
MHT8520724 | REXNORD | 2.438 Inch | 61.925 Millimeter | Bearing | 43.584 | 31171533 | 0.0 | 0 Inch | 0 Millimeter | 96 | Inch |
QM INDUSTRIES QVVTU19V308SM Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QAATU18A304SO Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V100SEO Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V311SEM Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V311SEN Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J050SC Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J050SEC Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J115SET Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V100SEC Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QVVTU22V100SO Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QMTU10J200SN Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
QM INDUSTRIES QAATU18A304SEN Take Up Unit Bearings | da:71.438 mm; Da:150 mm; Ca:45.796 mm; A1:88.9 mm; A2:198.438 mm; S:4.763 mm; ba:35.719 mm; H:182.166 mm; H1:95.25 mm; H2:31.75 mm; J min.:250.825 mm; J max.:279.4 mm; J1:53.975 mm; L:330.2 mm; N1:19.05 mm; R1:53.975 mm; R2:22.225 mm; RG:3/8 NPT; PG:1/8 NPT; h:34.925 mm; Housing:FSAF 517; Stabilizing ring:SR-17-14; Taconite seal:TER 53; End plug (suffix Y):EPR 9; Max. speed for Taconite seal:1050 r/min; P60°:61.4 kN; P90°:36.9 kN; P120°:23.1 kN; P150°:20.9 kN; P180°:25.4 kN; Pa:9.25 kN; Mass pillow block:17.9 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Initial grease fill:110.56 g; |
REXNORD MHT8520724 Take Up Unit Bearings Video
REXNORD MHT8520724 INTERCHANGE
Take Up Unit Bearings Part series MHT8520724 is a potential replacement for these common bearing part numbers:
MHT8520724
MHT8520724
MHT8520724
MHT8520724
MHT8520724
MHT8520724
MHT8520724
MHT8520724
Contact Us
- NACHI BEARINGS LTD
- Address7123 Kimberly Drive, Carol Stream, Illinois U.S.A.
- Phone(Working Time)+1-630-612-6376
- Fax
REXNORD MHT8520724 Technical Articles
Can I just replace rod bearings? |
Do both wheel bearings need replaced at the same time? |
How are steel ball bearings made? |
Take Up Unit Bearings CATEGORIES
- Angular Contact Ball Bearings
- Cam Follower and Track Roller - Stud Type
- Cartridge Unit Bearings
- Cylindrical Roller Bearings
- Flange Block Bearings
- Mounted Units & Inserts
- Needle Non Thrust Roller Bearings
- Pillow Block Bearings
- Precision Ball Bearings
- Self Aligning Ball Bearings
- Single Row Ball Bearings
- Sleeve Bearings
- Spherical Plain Bearings - Radial
- Spherical Plain Bearings - Rod Ends
- Spherical Roller Bearings
- Take Up Unit Bearings
- Tapered Roller Bearing Assemblies
- Insert Bearings Spherical OD
- Timken Hh221410 Bearing
- Timken 212049 Bearing
- Timken L68110 Bearing
- Timken L44649 Bearing
- THK Bearing
- SKF Bearing
- Thin Section Bearing
- Wheel Hub Bearing
- Excavator Bearing
- NOK SEAL
- SKF OIL SEAL
- TIMKEN NATIONAL SEALS