Self Aligning Ball Bearings

Contact Now

This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads.
However, depending on the surrounding structure, such an angle may not be possible.

Bearing Number	Bore Dia	Outer DIa	Width	Size
CONSOLIDATED BEARING 2222 C/3 Self Aligning Ball Bearings	Cast Iron	#4 Radial Extra Thrust	4.4375 in	None
CONSOLIDATED BEARING 2322-K Self Aligning Ball Bearings	Normal Duty	Setscrew Ball Bearing	208 Series	Cast Iron
CONSOLIDATED BEARING 2322 M Self Aligning Ball Bearings	Normal Duty	Setscrew Ball Bearing	211 Series	Cast Iron
CONSOLIDATED BEARING 2322 Self Aligning Ball Bearings	Normal Duty	Setscrew Ball Bearing	209 Series	Cast Iron
CONSOLIDATED BEARING RM-9 Self Aligning Ball Bearings	Intermediate Duty	Setscrew Ball Bearing	204 Series	Zinc
CONSOLIDATED BEARING RM-8 Self Aligning Ball Bearings	Normal Duty	D-Lock Ball Bearing	210 Series	Stainless Steel
CONSOLIDATED BEARING RM-7 Self Aligning Ball Bearings	Normal Duty	Setscrew Ball Bearing	206 Series	Cast Iron
CONSOLIDATED BEARING RM-6 Self Aligning Ball Bearings	Normal Duty	Setscrew Ball Bearing	209 Series	Cast Iron
CONSOLIDATED BEARING RM-22 Self Aligning Ball Bearings	Normal Duty	Setscrew Ball Bearing	212 Series	Cast Iron
CONSOLIDATED BEARING RM-26 Self Aligning Ball Bearings	Normal Duty	Setscrew Ball Bearing	212 Series	Cast Iron
CONSOLIDATED BEARING RM-14 Self Aligning Ball Bearings	Normal Duty	Setscrew Ball Bearing	206 Series	Cast Iron
CONSOLIDATED BEARING 2319-KM Self Aligning Ball Bearings	Intermediate Duty	Setscrew Ball Bearing	207 Series	Zinc